86 / BRZ is the oil temperature is very strict, in order to perform continuous laps at the circuit, the oil cooler is required.
So while performing circuit testing, was developed relates to a core position and hose material.
|●||Oil cooler core installation impact on small front bumper opening right to the radiator (water temperature). In addition, targeting a higher cooling effect, also has a set circuit specs that came with the air guide plate. In the test, as compared to the state without the air guide plate by attaching the air guide plate, it went down is 8 ℃ oil temperature. |
|●||Oil adopt a cooler hose to XRP (nylon mesh hose) "of nylon mesh hose Benefits" - flexible mounting easy fitting and core to take the burden (tension) mitigation is less aggressive, even in contact with the body or the like and, durable in lightweight (about 150g lighter per 1m compared to stainless steel mesh) |
● engine oil cooler 10 stages (NS1010G) ● oil block Standard type (dedicated oil block spacer included) ●oil cooler mounted when the engine oil level about 6ℓ (normal 5.2ℓ) 86 / BRZ for the oil cooler circuit test results For the oil cooler development, we conducted the test at Twin Ring Motegi East Course. Despite the wet road surface, greater than about 140 ℃ at three laps, including the shakedown travel results in. The sports cars has been demonstrated that the oil cooler's must-haves.RESULTS: If you install an oil cooler, oil temperature increases are gradual than the state of normal (without oil cooler), stable at 123~124 ℃. It is stable at 115 ℃ in the case of with the air guide plate, it was the result that. If the air guide plate is attached, and there -8~9 ℃ than without the air guide plate, we were able to confirm the effect of the air guide plate. ● GReddy oil cooler kit circuit spec 10 stages in order to aim a higher cooling effect than taking into account the circuit use, oil cooler kit that came with the air guide plate